C Series VRC Cantilever Lift

Takes a variety of loads and works in low overhead areas

The C Series, or Cantilever Lift, is a vertical conveyor perfect for a variety of load sizes and weights. The one-sided lifting design offers strength and stability to effortlessly move your items between levels. The C-Series cantilever lift is commonly used in warehouses where overhead space is low.

  • Most versatile – it allows 3 types of
    loading/unloading configurations
  • Carriage Size: Up to 8’W x 8’D
  • Travel Height: Up to 40’
  • Lifting Capacity: Up to 5,000 lbs
C Series VRC Lift, Vertical Conveyor from CIP


  • Low maintenance cost
  • Exceptional reliability
  • Simple operation and intuitive controls
  • Exceptional safety standards
  • Seamless integration into existing workflow


  • Illuminated operator controls at each level
  • Double-swing gates at each level
  • All-mechanical chain-lifting system
  • Quiet and efficient operation
  • Full-height carriage enclosures
  • Top mounted drive
  • Pit or surface mounts


  • Increased operating speed
  • Soft Start/Soft Stop operation (VFD)
  • Ground level loading ramp
  • Security enclosures
  • Outside applications
  • Anti-slip platform surface
  • Different colors available
  • Additional gate configurations
  • Platform gates available
  • Custom specifications available


  • Lifting Capacity: Up to 5,000 lbs
  • Carriage Size: Up to 8’W x 8’D
  • Travel Height: Up to 40’
  • Speed: 19 to 21 feet per minute standard
  • Number of Levels: Up to 6 stops
  • Load/Unload Config: “C”, “Z”, Pass Through, or 90 degree pattern
  • Power: 230V/3P, 460V/3P, or 230V/1P
  • Mounting: Surface or Pit
  • Gate Configuration: Double-swing standard
  • Flexible Load Heights (restricted only by height of ceiling on upper level)

Lift Configuration

  • “C” or loading and unloading from the same side
  • “Z” or from front to rear
  • Pass Through
  • 90 Degree Pattern

The Lift Configuration refers to the unloading and loading pattern of the cantilever lift. This lift allows for loading and unloading on the same side (“C”), from front to rear (“Z”) or 90 degree pattern.

Engineered to exceed Safety Standards

CIP Vertical Reciprocating Conveyors (VRCs) are manufactured to meet or exceed ANSI/ASME B20.1 Safety Standards for Conveyors and Related Equipment. This is the nationally recognized standard for vertical reciprocating conveyors. Proper installation is required to meet this standard. VRCs are not subject to ANSI/ASME A17.1 elevator codes unless specified, as they are designed for material lifting only.

Top View of C Series Cantilever Lift with Enclosure

C Series top view specifications

Front and Side View of C Series Cantilever Lift 

C series VRC cantilever Lift front view specifications