C-Series VRC Lift – take a variety of loads and work in low overhead areas.

  • Carriage Size: Up to 7’ x 7’
  • Travel Height: Up to 40’
  • Lift Capacity: Up to 5,000 lbs

The C-Series, or Cantilever Lift,
is perfect for a variety of load sizes and weights. The one-sided lifting design offers strength and stability to effortlessly move your items between levels

  • Commonly used in warehouses where overhead space is low
  • Top mounted drive allows for a smaller footprint
  • Most versatile – it allows 3 types of
    loading/unloading configurations
  • Exceptional safety standards
  • Double-swing gates


  • Illuminated operator controls at each level
  • Double-swing gates at each level
  • All-mechanical chain-lifting system


  • Increased operating speed
  • Soft Start/Soft Stop operation (VFD)
  • Ground level loading ramp
  • Security enclosures
  • Outside applications
  • Anti-slip platform surface
  • Different colors available
  • Additional gate configurations
  • Platform gates available


  • Lifting Capacity: Up to 5,000 lbs
  • Carriage Size: Up to 7’W x 7’D
  • Travel Height: Up to 40’
  • Speed: 19 to 21 feet per minute standard
  • Number of Levels: Up to 6 stops
  • Load/Unload Config: “C”, “Z” or 900 pattern
  • Power: 230V/3P, 460V/3P, or 230V/1P
  • Mounting: Surface or Pit
  • Gate Configuration: Double-swing standard
  • Flexible Load Heights (restricted only by
    height of ceiling on upper level)

lift configuration

pm series vrc lift

C-Series VRC Lift Configuration:

Refers to the unloading and loading pattern of the lift. This lift allows for loading and unloading on the same side (“C”), from front to rear (“Z”) or pass through.

  1. Clear Carriage Width =
  2. Clear Carriage Depth =
  3. Overall Carriage Width (A + 3”) =
  4. Overall Carriage Depth (B + 1.5”) =
  5. Vertical Travel (F/F) =
  6. Loading Height (6” Std)
  7. Upper Level Opening Width (A + 6”) =
  8. Upper Level Opening Depth (B + 29.25”) =
  9. Load Height (Open see note*) =
  10. Overall Lift Height (E + 78” min. + K if applicable) =
  11. Optional Pit Height (6” standard) =
  12. Pit Width Minimum (A + 6”) =
  13. Pit Depth Minimum (B + 29.25”) =
  14. Opening Width for Enclosures (A + 16”) =
  15. Opening Depth for Enclosures (B + 31.25”) =

Request Quote

Engineered to exceed Safety Standards.

CIP Vertical Reciprocating Conveyors (VRCs) are manufactured to meet or exceed ANSI/ASME B20.1 Safety Standards for Conveyors and Related Equipment. This is the nationally recognized standard for vertical reciprocating conveyors. Proper installation is required to meet this standard. VRCs are not subject to ANSI/ASME A17.1 elevator codes unless specified, as they are designed for material lifting only.

Top View of C-Series VRC Only

Top View with Enclosures

Front View of C-Series VRC Only

Side View of C-Series VRC Only

Standard specs, other specs available. Dimensions are for reference use only and may vary from actual unit. DO NOT perform building modifications based on these dimensions. Accurate engineering drawings will be provided after an approved order has been placed.

C-Series VRC Lift Applications.

CIP can engineer and manufacture a custom solution for any facility where products or materials need to move from one level to another including

  • Warehouses
  • Record Storage Centers
  • Self-Storage Facilities
  • Manufacturing Sites
  • Retail Stores
  • Restaurants and Bakeries
  • Distribution Centers
  • Mezzanine Access
  • Parts and Tire Shops
  • Automotive Dealerships
  • Schools and Universities
  • Workshops and Garages
  • Grocery Stores
  • Airports
  • And Much More

Think Higher. Think CIP.

If your business moves product or materials from one place to another, we have no doubt you will greatly benefit from one of our various material handling products. Take the first step to increasing your business’s safety and efficiency today.

Call 800.699.2212

Custom Industrial Products


7862 Ellis Road
Melbourne, FL 32904

Hours of Operation:
8 AM to 5 PM EST

Custom Industrial Products