FP Series, Four-Post Lift

Takes heavier, larger loads supported by 4 steel posts.

Our Four-Post Lifts are designed for moving larger, heavier loads, and the capabilities of these lifts are virtually limitless. The design is also scalable to provide large platform sizes capable of transporting forklifts and cars.

  • Carriage Size: Up to 30’ x 30’
  • Travel Height: Up to 60’
  • Lift Capacity: Up to 30,000 lbs
PM Series material lift or VRC from CIP

Benefits

  • Gently handles medium to very large items safely and efficiently
  • C, Z, 90 degree and pass-through configuration
  • All-mechanical design is chemically clean and quiet

Features

  • Soft Start/Soft Stop operation (VFD)
  • Rope safety brakes
  • Slack cable switches
  • Double-swing gates
  • Quad-rope lifting system
  • Top mounted drive system

Options

  • Increased operating speed
  • Ground level loading ramp
  • Security enclosures
  • Outside applications
  • Additional gate configurations
  • Anti-slip platform surface
  • Different colors available
  • Platform gates available
  • Sur-lock System for heavier loads
  • Recessed Platform Rings to strap down loads where platform gates are not available.
  • Custom specifications available

Specifications

  • Lifting Capacity: Up to 30,000 lbs
  • Carriage Size: Up to 30’W x 30’D
  • Travel Height: Up to 60’
  • Speed: 19 to 21 feet per minute standard
  • Number of Levels: Up to 6 stops
  • Load/Unload Config: “C”, “Z”, 90 or pass-through pattern
  • Power: 230V/3P or 460V/3P
  • Mounting: Surface or Pit
  • Gate Configuration: Double-swing standard
  • Flexible Load Heights

Lift Configuration

  • “C” or loading and unloading from the same side
  • “Z” or from front to rear, or
  • Pass through, which can be opened on both sides of lift
  • 90 degree

Refers to the unloading and loading pattern of the four-post lift. This lift allows for loading and unloading on the same side (“C”), from front to rear (“Z”), 90˚ or pass through.

Engineered to exceed Safety Standards

CIP Vertical Reciprocating Conveyors (VRCs) are manufactured to meet or exceed ANSI/ASME B20.1 Safety Standards for Conveyors and Related Equipment. This is the nationally recognized standard for vertical reciprocating conveyors. Proper installation is required to meet this standard. VRCs are not subject to ANSI/ASME A17.1 elevator codes unless specified, as they are designed for material lifting only.

Top View of FP Series VRC Four-Post Lift (with and without Enclosures)

FP Series four-post lift Top view

Front and Side view of FP Series VRC Four-Post Lift (no enclosure)

FP Series VRC front view

Pin It on Pinterest

Share This