TL-M Series Box Lift

Economical, versatile, & safe for smaller loads

The TL-M Series VRC box lift with its modular design is the most versatile and easy-to-use lift in its class. It maximizes the utilization of space while improving safety and efficiency.

  • Modular Design
  • Ideal for lighter, more compact loads
  • Carriage Size: 3’ W x 3’D
  • Travel Height: 8 feet to 16 feet
  • Lifting Capacity: 500 pounds
TL-M Material Lift VRC from CIP

Benefits

  • Typically used for boxes, carts, barrels, tires, parts, etc.
  • Minimal installation time
  • Maximizes floor space
  • Lowest cost of ownership
  • Exceptional reliability
  • Simple operation and intuitive controls
  • Exceptional safety standards
  • Seamless integration into existing workflow

Features

  • Tested in factory for quality assurance
  • Top mounted drive system
  • Illuminated operator controls at each level
  • Simplified installation
  • Quiet and efficient operation
  • Full-height carriage enclosures
  • Exceptional safety standards
  • Dual loading heights option available
  • Factory pre-wire

Options

  • Ergonomic shelf option
  • Ground level loading ramp
  • Stepdown Transformer from 460 3 Phase power

Specifications

  • Lifting Capacity: 500 pounds
  • Carriage Size: 3’ W x 3’D
  • Travel Height: 8 feet to 16 feet
  • Speed: 15 to 20 feet per minute
  • Number of Levels: 2
  • Load/Unload Config: “C” or “Z” pattern
  • Power: 220V/1P/60 Hz
  • Mounting: Surface or Pit
  • Maximum Load Height: 66 inches at full height (or 30 inches with optional shelf)
  • Ground Loading Height: 1-1/2 inches (or 31-1/2 inches when using optional shelf surface mount)
  • Gate Configuration: Single swing
  • Color: Silver gray (standard)

Lift Configuration

  • “C” or loading and unloading from the same side
  • “Z” or from front to rear

The Lift Configuration refers to the unloading and loading pattern of the box lift. This configuration allows for loading and unloading on the same side (“C”), from front to rear (“Z”) pattern.

VRC standard configuration (C,Z)

Engineered to exceed Safety Standards

CIP Vertical Reciprocating Conveyors (VRCs) are manufactured to meet or exceed ANSI/ASME B20.1 Safety Standards for Conveyors and Related Equipment. This is the nationally recognized standard for vertical reciprocating conveyors. Proper installation is required to meet this standard. VRCs are not subject to ANSI/ASME A17.1 elevator codes unless specified, as they are designed for material lifting only.

TL-M Series VRC Box Lift Top View

TL-M Series VRC box lift Top view diagram

TL-M Series VRC Box Lift Front View

TL-M Series VRC Lift front view diagram